8 x 9/16-in Phillips, Modified Truss Head, Fine Thread, Streaker® Point, Clear Zinc Screws (Bulk)
Item Number: SPLH916
Scorpion Type S/P Modified Truss Head fine-thread screws are designed for attaching wire lathing, framing, and other materials to metal 18-30 mil (25-20 gauge) studs.
Scorpion Type S/P Modified Truss Head fine-thread screws are designed for attaching wire lathing, framing, and other materials to metal 18-30 mil (25-20 gauge) studs.
Specifications
Application:Metal to Metal
Bit Tip:Phillips Bit Tip
Coating:Clear Zinc
Gauge:8
- Scorpion hex head self-drilling screws comply with ASTM C1513 for cold-formed steel framing connections.
-
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #8 up to 4,000 RPM.
- The Modified Truss Head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- Light gauge 18-30 mil (25-20ga) steel framing. K-lath installation.
- ©2012 GRABBER Construction Products, Inc. Scorpion®, & Streaker® are registered trademarks of Grabber Construction Products, Inc.
- Scorpion Type S/P Modified Truss Head fine-thread screws are designed for attaching wire lathing, framing, and other materials to metal 18-30 mil (25-20 gauge) studs.
Specifications
Application:Metal to MetalBit Tip:Phillips Bit TipCoating:Clear ZincGauge:8Head Type:Modified Truss HeadLength:9/16-inPackage Type:BulkPoint Type:Streaker®Thread Type:Fine ThreadTPI:15Amount:10000