8 x 3/4-in Phillips, Modified Truss Head, Fine Thread, #3 Drill Point, Clear Zinc Screws (Bulk)
Item Number: DPLH034
Scorpion Type D/P drill point screws are designed for heavy gauge metal to metal framing and lathing to metal framing applications.
Scorpion Type D/P drill point screws are designed for heavy gauge metal to metal framing and lathing to metal framing applications.
Specifications
Application:Metal to Metal
Gauge:8
Bit Tip:Phillips Bit Tip
Head Type:Modified Truss Head
Scorpion hex head self-drilling screws comply with ASTM C1513 for cold-formed steel framing connections.
- Use a standard screw gun with a depth-sensitive nose piece and use caution when installing with an impact driver. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM, Size #12 up to 1,800 RPM; however, 2,500 RPM may be used provided care is exercised to minimize influence of high heat buildup due to surface speed (see ASTM C1513, Table 5, note C).
- The Modified Truss head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
Scorpion Type D/P drill point screws are designed for heavy gauge metal to metal framing and lathing to metal framing applications.
Specifications
Application:Metal to Metal
Gauge:8
Bit Tip:Phillips Bit Tip
Head Type:Modified Truss Head
Thread Type:Fine Thread
Point Type:#3 Drill Point
Coating:Clear Zinc
Length:3/4-in
Package Type:Bulk
TPI:18
Amount:8000