7 x 1-1/4-in Phillips, Bugle Head, Fine Thread, #3 Drill Point, NanoGard™ Screws (5-LB)
Item Number: DPXT114CP
Scorpion Type DPXT Drill Point exterior fasteners are designed for attaching gypsum board and sheathing to heavy gauge metal studs 33-97 mil (20-12 gauge).
Scorpion Type DPXT Drill Point exterior fasteners are designed for attaching gypsum board and sheathing to heavy gauge metal studs 33-97 mil (20-12 gauge).
Specifications
Application:Drywall To Heavy-Gauge Metal
Gauge:7
Bit Tip:Phillips Bit Tip
Head Type:Bugle Head
Thread Type:Fine Thread
- The Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The Bugle Head screws are more evenly heat treated and tempered resulting consistent and reliable performance.
- NanoGard™ exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Self-tapping drill point is designed for quick penetration into heavy-gauge metal.
-
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #6 - #10 up to 2,500 RPM.
- The Bugle Head is fully seated when the top of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- Drywall or sheathing attachment to steel 33 mil or thicker.
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type DPXT Drill Point exterior fasteners are designed for attaching gypsum board and sheathing to heavy gauge metal studs 33-97 mil (20-12 gauge).
Specifications
Application:Drywall To Heavy-Gauge MetalGauge:7Bit Tip:Phillips Bit TipHead Type:Bugle HeadThread Type:Fine ThreadCoating:NanoGard™Point Type:#3 Drill PointLength:1-1/4-inPackage Type:5 LB, Mini-PackTPI:19