6 x 7/16-in Phillips, Pan Framing Head, Fine Thread, #3 Drill Point, Phosphate Screws (Bulk)
Item Number: DP716
Scorpion Type D/P drill point screws are designed for heavy gauge metal to metal framing applications.
Scorpion Type D/P drill point screws are designed for heavy gauge metal to metal framing applications.
Specifications
Application:Metal to Metal
Gauge:6
Bit Tip:Phillips Bit Tip
Head Type:Pan Framing Head
- Scorpion pan head self-drilling screws comply with ASTM C1513 for cold-formed steel framing connections.
-
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM.
- The Pan Framing Head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type D/P drill point screws are designed for heavy gauge metal to metal framing applications.
Specifications
Application:Metal to MetalGauge:6Bit Tip:Phillips Bit TipHead Type:Pan Framing HeadThread Type:Fine ThreadPoint Type:#3 Drill PointCoating:PhosphateLength:7/16-inPackage Type:BulkTPI:20Amount:15000