6 x 7/16-in Phillips, Low Profile Pan Head, Fine Thread, Streaker® Point, Phosphate Screws (Mini Pack)
Item Number: SP716LCP
Scorpion Type S/P framing screws for 18-30 mil (25-20 gauge) metal framing.
Scorpion Type S/P framing screws for 18-30 mil (25-20 gauge) metal framing.
Specifications
Application:Metal to Metal
Bit Tip:Phillips Bit Tip
Coating:Phosphate
Gauge:6
Head Type:Low Profile Pan Head
- Scorpion's #2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The Low Profile Pan Head screws are more evenly heat treated and tempered resulting consistent and reliable performance.
- The fine thread pan framing head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp twin lead thread screws drive faster and hold better in light gauge metal.
- The extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.
-
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #6 - #7 up to 4,000 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- Cold-formed, light gauge steel framing. HVAC and sheet metal.
- ©2012 GRABBER Construction Products, Inc. Scorpion® & Streaker® are registered trademarks of Grabber Construction Products, Inc.
- Scorpion Type S/P framing screws for 18-30 mil (25-20 gauge) metal framing.
Specifications
Application:Metal to MetalBit Tip:Phillips Bit TipCoating:PhosphateGauge:6Head Type:Low Profile Pan HeadLength:7/16-inPackage Type:Mini-PackPoint Type:Streaker®Thread Type:Fine ThreadTPI:17Amount:1500