6 x 1-1/4-in Phillips, Bugle Head, Hi-Lo Thread, Streaker® Point, Clear Zinc Screws (Bulk)
Item Number: SSTZ114
Scorpion Type SST super-thread screws are designed for attaching gypsum board to wood or light gauge 18-30 mil (25-20 gauge) steel studs. The special alternating coarse and fine threads increase holding power and reduce strip-outs.
Scorpion Type SST super-thread screws are designed for attaching gypsum board to wood or light gauge 18-30 mil (25-20 gauge) steel studs. The special alternating coarse and fine threads increase holding power and reduce strip-outs.
Specifications
Application:Drywall to Metal or Wood
Bit Tip:Phillips Bit Tip
Coating:Clear Zinc
Gauge:6
- Scorpion hi-lo thread drywall screws comply with ASTM C1002 for attaching gypsum panel products to cold-formed steel or wood.
-
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #6 - #10 up to 4,000 RPM.
- The Bugle Head is fully seated when the screw is below the surface of the wallboard in accordance with Section 7.2.2 of ASTM C1002.
- The fastener must penetrate beyond the metal three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- Drywall attachment to light gauge steel or wood.
- ©2012 GRABBER Construction Products, Inc. Scorpion® & Streaker® are registered trademarks of Grabber Construction Products, Inc.
- Scorpion Type SST super-thread screws are designed for attaching gypsum board to wood or light gauge 18-30 mil (25-20 gauge) steel studs. The special alternating coarse and fine threads increase holding power and reduce strip-outs.
Specifications
Application:Drywall to Metal or WoodBit Tip:Phillips Bit TipCoating:Clear ZincGauge:6Head Type:Bugle HeadLength:1-1/4-inPackage Type:BulkPoint Type:Streaker®Thread Type:Hi-Lo ThreadTPI:18 Hi-LoAmount:8000