14-20 x 3-1/4-in Phillips, Flat Head, Fine Thread, Slotted Shank, Winged Drill Point NanoGard™ Screws (Bulk)
Item Number: T4PF14314XT
Scorpion Type T4PF flat head Tek 4 winged drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. NanoGard™ exterior grade coating improves corrosion resistance. Performance range is 1/4" to 1” lumber to 16 gauge steel to .210 steel.
Scorpion Type T4PF flat head Tek 4 winged drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. NanoGard™ exterior grade coating improves corrosion resistance. Performance range is 1/4" to 1” lumber to 16 gauge steel to .210 steel.
Specifications
Application:Sheathing to Metal
Gauge:14
Bit Tip:Phillips Bit Tip
Head Type:Flat Head
Thread Type:Fine Thread
- The #3 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The flat head design provides better holding power in sheathing to heavy-gauge metal applications.
- NanoGard™ exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the screw drives eliminating jacking.
-
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #12 - #14 up to 1,800 RPM; however, 2,500 RPM may be used provided care is exercised to minimize influence of high heat buildup due to surface speed (see ASTM C1513, Table 5, note C).
- The flat head is fully seated when the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving my result in fastener failure or strip out of the work surface.
- For attaching plywood and sheathing to heavy gauge metal.
- Winged drill point - slotted shank
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type T4PF flat head Tek 4 winged drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. NanoGard™ exterior grade coating improves corrosion resistance. Performance range is 1/4" to 1” lumber to 16 gauge steel to .210 steel.
Specifications
Application:Sheathing to MetalGauge:14Bit Tip:Phillips Bit TipHead Type:Flat HeadThread Type:Fine ThreadPoint Type:Winged Drill PointCoating:NanoGard™Length:3-1/4-inPackage Type:BulkShank Type:SlottedTPI:20Amount:1000