12 x 2-in Hex Washer with EPDM Washer, Fine Thread, Slotted Shank, #5 Drill Point, NanoGard™ Screws (Bulk)
Item Number: T5HW12200WXT
Scorpion Type T5HW Hex washer head drill point screws are designed for heavy-gauge metal to metal framing applications. NanoGard™ exterior grade coating improves corrosion resistance. Performance range up to 0.500.
Scorpion Type T5HW Hex washer head drill point screws are designed for heavy-gauge metal to metal framing applications. NanoGard™ exterior grade coating improves corrosion resistance. Performance range up to 0.500.
Specifications
Application:Metal to Metal
Gauge:12
Bit Tip:Hex Nut Driver
Head Type:Hex Head with EPDM Washer
Thread Type:Fine Thread
- Hex washer head design provides maximum torque and holding power in metal to metal framing applications.
- The hex washer head design provides a larger load bearing surface for better holding power.
- NanoGard™ exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Self-tapping drill point is designed for quick penetration into heavy-gauge metal.
-
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #10 up to 2,500 RPM, Size #12 up to 1,800 RPM; however, 2,500 RPM may be used provided care is exercised to minimize influence of high heat buildup due to surface speed (see ASTM C1513, Table 5, note C).
- The hex head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.
- EPDM Washer - Slotted Shank
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type T5HW Hex washer head drill point screws are designed for heavy-gauge metal to metal framing applications. NanoGard™ exterior grade coating improves corrosion resistance. Performance range up to 0.500.
Specifications
Application:Metal to MetalGauge:12Bit Tip:Hex Nut DriverHead Type:Hex Head with EPDM WasherThread Type:Fine ThreadPoint Type:#5 Drill PointCoating:NanoGard™Length:2-inPackage Type:BulkTPI:24Amount:1500