10 x 2-in Phillips, Wafer Head, Fine Thread, #3 Drill Point, NanoGard™ Screws (Bulk)
Item Number: T3PW10200XTNW
Scorpion Type T3PW Wafer Head drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. Performance range is 1/4" to 3/4" lumber to 43-118 mil (18-10 gauge) steel.
Scorpion Type T3PW Wafer Head drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. Performance range is 1/4" to 3/4" lumber to 43-118 mil (18-10 gauge) steel.
Specifications
Application:Cement Board to Metal
Gauge:10
Bit Tip:Phillips Bit Tip
Thread Type:Fine Thread
Head Type:Wafer Head
- The Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The Wafer Head design provides for a larger load bearing surface and better holding power in cement board to heavy gauge metal applications.
- NanoGard™ exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Self-tapping drill point is designed for quick penetration into heavy-gauge metal.
-
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with an impact driver. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM.
- The Wafer Head is fully seated when the top of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- For attaching cement board to heavy gauge metal 43 mil (18ga) or thicker.
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type T3PW Wafer Head drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. Performance range is 1/4" to 3/4" lumber to 43-118 mil (18-10 gauge) steel.
Specifications
Application:Cement Board to MetalGauge:10Bit Tip:Phillips Bit TipThread Type:Fine ThreadHead Type:Wafer HeadPoint Type:Drill PointCoating:NanoGard™Length:2-inPackage Type:BulkTPI:24Amount:2000