8 x 3/4-in #2 Phillips, Dome Head, Fine Thread, Tek 3 Drill Point, Clear Zinc Screws (1-LB)
Item Number: X834FZ3
Attaches heavy-gauge metal to metal applications.
ICC-ES Evaluated
ESR-1271 Report
Attaches heavy-gauge metal to metal applications.
ICC-ES Evaluated
ESR-1271 Report
Specifications
Application:Metal to Metal
Gauge:8
Bit Tip:#2 Phillips
Head Type:Dome Head
Thread Type:Fine Thread
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The dome head design provides better holding power in metal to heavy-gauge metal applications.
- Grabber heavy-gauge metal screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
-
- Suggested screwgun specification for optimal performance – Size #8, up to 2,500 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or stripout within the substrate.
-
- Heavy-gauge metal to metal applications.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
Specifications
Application:Metal to MetalGauge:8Bit Tip:#2 PhillipsHead Type:Dome HeadThread Type:Fine ThreadPoint Type:Tek 3 Drill PointCoating:Clear ZincLength:3/4-inPackage Type:1-lb