8 x 1-5/8-in LOX Drive, Flat Wafer Head, Fine Thread, Winged Drill Point, GrabberGard® Gray Screws (Collated)
Item Number: CGH8158LG
For attaching high density sheathing to heavy gauge cold-formed steel, 33-97 mil (20-12ga).
ICC-ES Evaluated
ESR-4223 Report
For attaching high density sheathing to heavy gauge cold-formed steel, 33-97 mil (20-12ga).
ICC-ES Evaluated
ESR-4223 Report
Specifications
Application:Sheathing to Metal
Bit Tip:LOX® Bit Tip
Coating:GrabberGard® Gray
Gauge:8
- Grabber's LOX® recess provides ultimate torque.
- Thin wafer head design provides for a larger load bearing surface and better holding power in sheathing to heavy gauge metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the fastener drives in.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM.
- The screw head is fully seated when the screw head is flush with the surface of the material.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener.
- Attach high density sheathing or cement board to steel 33 mil or thicker.
- Winged Drill Point - Collated
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
For attaching high density sheathing to heavy gauge cold-formed steel, 33-97 mil (20-12ga).
ICC-ES Evaluated
ESR-4223 ReportSpecifications
Application:Sheathing to MetalBit Tip:LOX® Bit TipCoating:GrabberGard® GrayGauge:8Head Type:Flat Wafer HeadLength:1-5/8-inPackage Type:Box, CollatedPoint Type:Drill PointThread Type:Fine ThreadAmount:1000