7 x 7/16-in Phillips, Pan Framing Head, Fine Thread, Vector™ Point Phosphate Screws (1-LB)
Item Number: X23V
Cold-formed steel light-gauge metal to metal framing up to 0.033-in.
Cold-formed steel light-gauge metal to metal framing up to 0.033-in.
Specifications
Application:Metal to Metal
Bit Tip:Phillips Bit Tip
Coating:Phosphate
Gauge:7
Head Type:Pan Framing Head
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Under head serrations lock tight in light gauge metal to metal applications.
- Grabber fine thread pan framing head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp twin lead thread screws drive faster and hold better in light gauge metal.
- The super-sharp Vector™ point starts and drives up to 40% faster than most other fine thread metal framing screws.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #7 - #10, up to 4,000 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
- Cold-formed, light gauge steel framing. HVAC and sheet metal.
- Vector™ Point - Serrations Under Head
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- Cold-formed steel light-gauge metal to metal framing up to 0.033-in.
Specifications
Application:Metal to MetalBit Tip:Phillips Bit TipCoating:PhosphateGauge:7Head Type:Pan Framing HeadLength:7/16-inPackage Type:1-lbPoint Type:Vector™ PointThread Type:Fine ThreadAmount:385