7 x 7/16-in Phillips, Pan Framing Head, Fine Thread, Vector™ Point GrabberGard® Gray Screws (Bulk)
Item Number: 23VRG
Cold-formed steel light-gauge metal to metal framing up to 0.033-in.
Cold-formed steel light-gauge metal to metal framing up to 0.033-in.
Specifications
Application:Metal to Metal
Bit Tip:Phillips Bit Tip
Coating:GrabberGard® Gray
Gauge:7
Head Type:Pan Framing Head
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Under head serrations lock tight in light gauge metal to metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- The super-sharp Vector™ point starts and drives up to 40% faster than most other fine thread metal framing screws.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #7 - #10, up to 4,000 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
- Cold-formed, light gauge steel framing. HVAC and sheet metal.
- Vector™ Point - Serrations Under Head
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- Cold-formed steel light-gauge metal to metal framing up to 0.033-in.
Specifications
Application:Metal to MetalBit Tip:Phillips Bit TipCoating:GrabberGard® GrayGauge:7Head Type:Pan Framing HeadLength:7/16-inPackage Type:BulkPoint Type:Vector™ PointThread Type:Fine ThreadAmount:15000