7 x 2-1/4-in Square Drive, Trim Head, Fine Thread, Streaker® Point, GrabberGard® Gray Screws (1-LB)
Item Number: X18SRG
Used to attach wood, metal or plastic trim to light-gauge metal or wood. Streaker® point means quick and easy penetration while the smaller, less noticeable head provides a finished look.
Used to attach wood, metal or plastic trim to light-gauge metal or wood. Streaker® point means quick and easy penetration while the smaller, less noticeable head provides a finished look.
Specifications
Application:Trim to Metal or Wood
Bit Tip:Square Bit Tip
Coating:GrabberGard® Gray
Gauge:7
Head Type:Trim Head
- The No. 1 square recess is a precision recess designed for secure bit engagement in trim to wood or light gauge metal applications.
- Grabber trim head screws are more evenly heat treated and tempered resulting consistent and reliable performance.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #7 - #8, up to 4,000 RPM.
- The trim head is fully seated when the screw is below the surface of the material.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
- Trim material attachment to light gauge steel or wood.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
Used to attach wood, metal or plastic trim to light-gauge metal or wood. Streaker® point means quick and easy penetration while the smaller, less noticeable head provides a finished look.
Specifications
Application:Trim to Metal or WoodBit Tip:Square Bit TipCoating:GrabberGard® GrayGauge:7Head Type:Trim HeadLength:2-1/4-inPackage Type:1-lbPoint Type:23° Streaker® PointThread Type:Fine ThreadAmount:150