7 x 2-1/4-in Square Drive, Trim Head, Fine Thread, Drill Point, GrabberGard® Gray Screws (Bulk)
Item Number: 18SDRG
Used to attach wood, metal or plastic trim to heavy-gauge metal. Extra sharp drill point means easy penetration while the smaller, less noticeable head provides a finished look.
Used to attach wood, metal or plastic trim to heavy-gauge metal. Extra sharp drill point means easy penetration while the smaller, less noticeable head provides a finished look.
Specifications
Application:Trim to Metal
Gauge:7
Bit Tip:Square Bit Tip
Head Type:Trim Head
Thread Type:Fine Thread
- The #1 Square recess is a precision recess designed for secure bit engagement in trim to heavy-gauge metal applications.
- Grabber trim head screws are more evenly heat treated and tempered resulting consistent and reliable performance.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #7 - #8, up to 2,500 RPM.
- The screw is fully seated when the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener.
- Trim material attachment to steel 33 mil or thicker.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. Specific fasteners are listed in ICC ESR-1271; please check the report for listed item numbers. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- Used to attach wood, metal or plastic trim to heavy-gauge metal. Extra sharp drill point means easy penetration while the smaller, less noticeable head provides a finished look.
Specifications
Application:Trim to MetalGauge:7Bit Tip:Square Bit TipHead Type:Trim HeadThread Type:Fine ThreadPoint Type:Drill PointCoating:GrabberGard® GrayLength:2-1/4-inPackage Type:BulkAmount:4000