11 x 2-3/8-in LOX® 3, Modified Pan Head, Hi-Lo Thread, Drill Point, GrabberGard® Gray Screws (1-LB)
Item Number: XDMWH238G2
Grabber Xtek metal to wood screws have been specifically designed for attaching metal 33-97 mil (20-12ga) to wood members.
Grabber Xtek metal to wood screws have been specifically designed for attaching metal 33-97 mil (20-12ga) to wood members.
Specifications
Application:Metal to Wood
Gauge:11
Bit Tip:LOX® 3 Bit Tip
Head Type:Modified Pan Head
Thread Type:Hi-Lo Thread
- LOX® 3 recess was designed for today's screw guns and for applications where high-torque is required. LOX® will not strip out like most other recesses.
- Under head serrations lock tight in metal to wood applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #11 up to 2,500 RPM.
- The head is fully seated when the load bearing part of the head is flush with the substrate.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or stripout within the substrate.
- Attach heavy gauge steel 33-97 mil (20-12ga) to wood members.
- Underhead serrations
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- Grabber Xtek metal to wood screws have been specifically designed for attaching metal 33-97 mil (20-12ga) to wood members.
Specifications
Application:Metal to WoodGauge:11Bit Tip:LOX® 3 Bit TipHead Type:Modified Pan HeadThread Type:Hi-Lo ThreadPoint Type:Drill PointCoating:GrabberGard® GrayLength:2-3/8-inPackage Type:1-lbAmount:2000