Attaches 3/16” to 3/4” plywood to 20-8 gauge metal. Wafer head provides a greater bearing surface than pan or hex drillers, with a low-profile head exposure.
Superfast #3 drill point, 24 threads-per-inch, thin wafer head provides a flush finished surface, winged point creates pilot hole through the plywood.
GrabberGard® exterior grade coating
GrabberGard metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films.
Attaches 3/16” to 3/4” plywood to 20-8 gauge metal. Wafer head provides a greater bearing surface than pan or hex drillers, with a low-profile head exposure.
Superfast #3 drill point, 24 threads-per-inch, thin wafer head provides a flush finished surface, winged point creates pilot hole through the plywood.
GrabberGard® exterior grade coating
GrabberGard metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films.
Specifications
Application:Sheathing to Metal
Gauge:10
Bit Tip:Phillips Bit Tip
Head Type:Wafer Head
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Thin wafer head design provides for a larger load bearing surface and better holding power in sheathing to heavy gauge metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the fastener drives in.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM.
- The screw head is fully seated when the screw head is flush with the surface of the material.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener.
- Attach sheathing, 3/16" to 3/4", to cold-formed steel 33 mil or thicker.
- Winged Drill Point
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
Attaches 3/16” to 3/4” plywood to 20-8 gauge metal. Wafer head provides a greater bearing surface than pan or hex drillers, with a low-profile head exposure.
Superfast #3 drill point, 24 threads-per-inch, thin wafer head provides a flush finished surface, winged point creates pilot hole through the plywood.
GrabberGard® exterior grade coating
GrabberGard metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films.Specifications
Application:Sheathing to MetalGauge:10Bit Tip:Phillips Bit TipHead Type:Wafer HeadThread Type:Fine ThreadPoint Type:Winged Drill PointCoating:GrabberGard® GrayLength:1-7/16-inPackage Type:BulkAmount:4000