Attaches 3/16-in to 3/4-in plywood to 20-8 gauge metal. Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure.
Superfast #3 drill point, 24 threads-per-inch, thin wafer head provides a flush finished surface, winged point creates pilot hole through the plywood.
Attaches 3/16-in to 3/4-in plywood to 20-8 gauge metal. Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure.
Superfast #3 drill point, 24 threads-per-inch, thin wafer head provides a flush finished surface, winged point creates pilot hole through the plywood.
Specifications
Application:Sheathing to Metal
Gauge:10
Bit Tip:Phillips Bit Tip
Head Type:Wafer Head
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Thin wafer head design provides for a larger load bearing surface and better holding power in sheathing to heavy gauge metal applications.
- Grabber heavy gauge sheathing screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the fastener drives in.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM.
- The screw head is fully seated when the screw head is flush with the surface of the material.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener.
- Attach sheathing, 3/16" to 3/4", to cold-formed steel 33 mil or thicker.
- Winged Drill Point
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
Attaches 3/16-in to 3/4-in plywood to 20-8 gauge metal. Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure.
Superfast #3 drill point, 24 threads-per-inch, thin wafer head provides a flush finished surface, winged point creates pilot hole through the plywood.
Specifications
Application:Sheathing to MetalGauge:10Bit Tip:Phillips Bit TipHead Type:Wafer HeadThread Type:Fine ThreadPoint Type:Winged Drill PointCoating:Clear ZincLength:1-7/16-inPackage Type:BulkAmount:4000