10 x 1-3/4-in Phillips, Wafer Head, Fine Thread, Winged Drill Point, Clear Zinc Screws (5-LB)
Item Number: VB10175WSDZ
For attaching high density sheathing to heavy gauge cold-formed steel, 33-97 mil (20-12ga).
For attaching high density sheathing to heavy gauge cold-formed steel, 33-97 mil (20-12ga).
Specifications
Application:Sheathing to Metal
Bit Tip:Phillips Bit Tip
Coating:Clear Zinc
Gauge:10
Head Type:Wafer Head
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Thin wafer head design provides for a larger load bearing surface and better holding power in sheathing to heavy gauge metal applications.
- Grabber heavy gauge sheathing screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the fastener drives in.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM.
- The screw head is fully seated when the screw head is flush with the surface of the material.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener.
- Attach sheathing, 3/16" to 3/4", to cold-formed steel 33 mil or thicker.
- Winged Drill Point
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- For attaching high density sheathing to heavy gauge cold-formed steel, 33-97 mil (20-12ga).
Specifications
Application:Sheathing to MetalBit Tip:Phillips Bit TipCoating:Clear ZincGauge:10Head Type:Wafer HeadLength:1-3/4-inPackage Type:5-lbPoint Type:Winged Drill PointThread Type:Fine ThreadAmount:544