10 x 3-5/8-in Phillips, Bugle Head, Fine Thread, #3.5 Pilot Point, NanoGard™ Screws (Bulk)
Item Number: T3PB10358
Scorpion Type T3PB Leader Point screws are designed for attaching sheathing to heavy gauge metal. NanoGard™ exterior grade coating improves corrosion resistance.
Scorpion Type T3PB Leader Point screws are designed for attaching sheathing to heavy gauge metal. NanoGard™ exterior grade coating improves corrosion resistance.
Specifications
Application:Drywall To Heavy-Gauge Metal
Bit Tip:Phillips Bit Tip
Coating:NanoGard™
Gauge:10
- Scorpion hex head self-drilling screws comply with ASTM C1513 for cold-formed steel framing connections. Salt spray tested according to ASTM B117 for 1000 hours; 15 cycles Kesternich per DIN 50018; no red rust. Approved for use in non-coastal areas with all pressure treated lumbers including ACQ.
-
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM, Size #12 up to 1,800 RPM; however, 2,500 RPM may be used provided care is exercised to minimize influence of high heat buildup due to surface speed (see ASTM C1513, Table 5, note C).
- The Bugle Head is fully seated when the top of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- Drywall or sheathing attachment to steel 33 mil or thicker.
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type T3PB Leader Point screws are designed for attaching sheathing to heavy gauge metal. NanoGard™ exterior grade coating improves corrosion resistance.
Specifications
Application:Drywall To Heavy-Gauge MetalBit Tip:Phillips Bit TipCoating:NanoGard™Gauge:10Head Type:Bugle HeadLength:3-5/8-inPackage Type:BulkPoint Type:#3.5 Pilot PointThread Type:Fine ThreadTPI:16Amount:1000